MIKROTIK ACCESS POINT WLAN 2.4/5 GHZ CAP AC 2 PORT, L4 RBCAPGI-5ACD2ND

MODEL : RBCAPGI-5ACD2NDCAP AC. DUAL-BAND 2.4 / 5GHZ WIRELESS ACCESS POINT FOR MOUNTING ON A CEILING OR WALL WITH TWO GIGABIT ETHERNET PORTS (ONE WITH POE OUTPUT), 802.11AC SUPPORT AND IPSEC HARDWARE ENCRYPTION SUPPORT. THE CAP AC IS A VERY CAPABLE AND POWERFUL WIRELESS ACCESS POINT THAT LOOKS BEAUTIFUL ON BOTH WALLS AND CEILINGS. THE CONCURRENT DUAL BAND WIRELESS RADIO SUPPORTS DUAL CHAIN 2 GHZ 802.11B/G/N AND 5 GHZ IN A/N/?? STANDARDS, AND WILL PROVIDE COVERAGE IN 360 DEGREES AROUND IT. EVEN THOUGH THE RADIO SUPPORTS REPEATER MODE, THE TWO ETHERNET PORTS GIVE YOU THE ABILITY TO EXTEND YOUR NETWORK WITH CABLES, EVEN IF POE POWER IS REQUIRED, SINCE THE CAP AC SUPPORTS 802.3AF/AT POE INPUT ON THE FIRST PORT, AND PASSIVE POE OUTPUT ON THE SECOND PORT. DEVICE SUPPORTS IPSEC HARDWARE ACCELERATION TOO. SPECIFICATIONS DETAILS : ARCHITECTURE ARM 32BIT, CPU IPQ-4018, CPU CORE COUNT 4, CPU NOMINAL FREQUENCY 716 MHZ, DIMENSIONS ROUND CASE: ? 136 MM, HEIGHT: 30 MM SQUARE CASE: 145 MM X 145 MM X 30 MM, ROUTEROS LICENSE 4, OPERATING SYSTEM ROUTEROS, SIZE OF RAM 128 MB, STORAGE SIZE 16 MB, STORAGE TYPE FLASH, MTBF APPROXIMATELY 100’000 HOURS AT 25C, TESTED AMBIENT TEMPERATURE -40°C TO 50°C, IPSEC HARDWARE ACCELERATION YES. WIRELESS CAPABILITIES DETAILS : WIRELESS 2.4 GHZ MAX DATA RATE 300 MBIT/S, WIRELESS 2.4 GHZ NUMBER OF CHAINS 2, WIRELESS 2.4 GHZ STANDARDS 802.11B/G/N, ANTENNA GAIN DBI FOR 2.4 GHZ 2, WIRELESS 2.4 GHZ CHIP MODEL IPQ-4018, WIRELESS 2.4 GHZ GENERATION WI-FI 4, WIRELESS 5 GHZ MAX DATA RATE 867 MBIT/S, WIRELESS 5 GHZ NUMBER OF CHAINS 2, WIRELESS 5 GHZ STANDARDS 802.11A/N/AC, ANTENNA GAIN DBI FOR 5 GHZ 2.5, WIRELESS 5 GHZ CHIP MODEL IPQ-4018, WIRELESS 5 GHZ GENERATION WI-FI 5, AC SPEED AC1200. ETHERNET DETAILS : 10/100/1000 ETHERNET PORTS 2. POWERING DETAILS : NUMBER OF DC INPUTS 1 (POE-IN), MAX POWER CONSUMPTION 24 W, MAX POWER CONSUMPTION WITHOUT ATTACHMENTS 13 W, FAN COUNT PASSIVE, POE IN 802.3AF/AT, POE IN INPUT VOLTAGE 17-57 V, POE-OUT DETAILS : POE-OUT PORTS ETHER2, POE OUT PASSIVE POE UP TO 57V, MAX OUT PER PORT OUTPUT (INPUT 18-30 V) 500 MA, MAX OUT PER PORT OUTPUT (INPUT 30-57 V) 400 MA, MAX TOTAL OUT (A) 500 MA. CERTIFICATION & APPROVALS DETAILS : CERTIFICATION CE, FCC, IC, EAC, ROHS